ONE

1.06 x 1.38 x 2.26 m
3.48 x 4.53 x 7.38 ft

ONE PLUS

1.06 x 1.68 x 2.26 m
3.48 x 5.51 x 7.38 ft

ONE XXL

1.06 x 1.98 x 2.26 m
6.5 x 4 x 7.3 ft.

CUSTOM SOLUTIONS

Flexible

PHONE & WORKING BOOTHS

1.06 x 1.06 x 2.26 m
3.5 x 3.5 x 7.4 ft
1.17 x 1.17 x 2.22 m
3.8 x 3.8 x 7.3 ft

1.38 x 1.06 x 2.24 m
4.5 x 3.5 x 7.3 ft

1.21 x 1.68 x 2.24 m
4 x 5.5 x 7.3 ft

OFFICE BOOTHS

Focus Spaces

1.68 x 1.21 x 2.24 m
5.5 x 4 x 7.3 ft

1.98 x 1.21 x 2.47 m
6.5 x 4 x 8 ft

1.98 x 1.68 x 2.47 m
6.5 x 5.5 x 8 ft

2.58 x 2.58 x 2.47 m
8.5 x 8.5 x 8 ft

2.88 x 3.18 x 2.47 m
9.4 x 10.4 x8 ft

3.48 x 4.08 x 2.47 m
11.4 x 13.4 x 8 ft

6.78 x 4.68 x 3.07 m
22.2 x 15.4 x 10.1 ft

ARE THE BOOTHS SAFE IN CASE OF AN EARTHQUAKE?

ARE THE BOOTHS SAFE IN CASE OF AN EARTHQUAKE?

Seismic requirements are typically related to our products’ ability to stay upright in case of an earthquake. The Studiobricks booth is currently being tested for this.

Can I change the acoustics in the booth?

Can I change the acoustics in the booth?

Studiobricks booths are equipped with premium absorption elements.
For professional recording, we recommend ordering additional elements to create the necessary stereophonics without echo.
These are the elements that come standard:

  • Studiobricks One and One Plus: Studiobricks Classic 50.
  • Studiobricks Double-wall: Studiobricks Classic 50 light grey. Studiobricks Classic BTraps are also available.
  • Studiobricks Pro: custom elements from Studiobricks, includes Studiobricks Classic BTraps and Studiobricks Classic 50 light grey.

Can I install Studiobricks acoustic booths in an apartment?

Can I install Studiobricks acoustic booths in an apartment?

Studiobricks can be heavy, so should be installed on a load-bearing surface.
For smaller booths, the load generally works with typical residential surfaces.
For larger booths, please consult a structural engineer.

DO THE BOOTHS NEED SPRINKLERS?

DO THE BOOTHS NEED SPRINKLERS?

All small booths are easily removable through roller casters (except for the FOCUS series) so that:

  • None significantly exceed the 1m maximum dimension for covered spaces
  • None contain any easily combustible materials or increase the fire load of the surrounding space by hindering its sprinkler system
  • They can be considered movable furniture instead of building structures that sprinkler requirements are typically established for

However, our products can be fitted with sprinklers if local regulations require. Studiobricks does not provide or install sprinkler systems. Instructions for doing so are available upon request.

How are cables passed through the booth?

How are cables passed through the booth?

Each booth has a cable tunnel for up to 10 (double-walled) or 4 (triple-walled) cables. Additional cable tunnels are available.

How are Studiobricks delivered?

How are Studiobricks delivered?

  1. You’ll receive a the contact details of the local delivery company as soon as the booth ships.
  2. The delivery company will contact you to coordinate date & time.
  3. The booth is delivered in one or several hard cardboard box on a pallet to the curbside.
  4. You will need another person to help you carry the box’s contents to your booth’s new home.

Please note: if the delivery company wants to deliver the booth without previously having coordinated with you and the delivery window is not convenient for you, send the driver away and call the agency.

Further information on ordering and delivery process upon request.

HOW CAN I ORDER ONE OF THE STUDIOBRICKS BOOTHS?

HOW CAN I ORDER ONE OF THE STUDIOBRICKS BOOTHS?

Send us an inquiry to info@studiobricks.com, or visit us at one of our showrooms or tradeshows. Or, simply give us a call and we’ll be happy to offer you advice & information. (view contact). Before ordering, we can provide an offer with 3D drawings and all key info, including packaging, shipping and assembly.

HOW GOOD IS THE SOUND ISOLATION OF THE STUDIOBRICKS PRODUCTS?

HOW GOOD IS THE SOUND ISOLATION OF THE STUDIOBRICKS PRODUCTS?

Our products offer the highest sound isolation in the market with an average of 45 dB. FOCUS booths perform best due to their special sound control door.

Double-walled booths are not 100% soundproof, but have highest-in-class sound-absorbing & isolating properties. A completely soundproof cabin would require bulky walls that would disable from personal and office use. Studiobricks booths are simply the best solution for sound isolation. You can download the acoustic results measured by a certified company according to ISO standards on each product page.

The sound isolation of all Studiobricks products allows you to use them in the middle of an office without disrupting others working nearby, or allowing them to overhear discussions within the booths. We welcome you to step inside a Studiobricks booth to feel the superpower of silence and confirm that our sound isolation exceeds your needs!

How is the booth ventilated?

How is the booth ventilated?

Air from the booth is blown out from a soundproofed exhaust air outlet. A ventilator is available as an addition for all booths. It is extremely quiet (especially designed for recordings) and contains an air filter.

For larger booths, we recommend adding two or more fans. You can also consider a sound isolated muffler system if your building has an HVAC system that can be used to connect the booth to.

HOW LONG ARE THE POWER CABLES?

HOW LONG ARE THE POWER CABLES?

3m

How long do deliveries take?

How long do deliveries take?

Studiobricks Double-Wall and PRO Triple-Wall booths deliver in approximately six weeks.
We generally have Studiobricks One booths in stock, so can ship them almost immediately!

How long does it take to install the booth?

How long does it take to install the booth?

Studiobricks booths are easily assembled without drilling, screwing or adhesive bonding! Here is a short video showing a Studiobricks One booth being assembled in 7.5 minutes, and dismantled in 3 (click here). The time of installation depends on the size of the booth, having all the pieces organized as the manual recommends.

HOW LONG DOES MANUFACTURING TAKE?

HOW LONG DOES MANUFACTURING TAKE?

Studiobricks have a production time of 2-10 weeks, depending on the model.

HOW MUCH SPACE DOES THE BOOTH REQUIRE?

HOW MUCH SPACE DOES THE BOOTH REQUIRE?

For acoustic and ventilation purposes, our booths must be decoupled from building walls, with a minimum distance of 5cm (16.4 inch).

How thick are the booth walls?

How thick are the booth walls?

  • Studiobricks One, One Plus and One XXL: Double-wall – 3.15 inch (8 cm)
  • Studiobricks Double-wall – 3.15 inch (8 cm)
  • Studiobricks PRO Triple-wall – 4.33 inch (11 cm)

IS IT POSSIBLE TO DISMANTLE THE BOOTHS AND THEN REASSEMBLE THEM IN A NEW SPACE?

IS IT POSSIBLE TO DISMANTLE THE BOOTHS AND THEN REASSEMBLE THEM IN A NEW SPACE?

Yes – our patented modular design allows for simple set up & dismantling so that the booth can easily go where you do. FOCUS booths are quickly installed, without adhesives or screws.

HOLA and HALLO booths require about 4 screws to install, but stand on casters for easy relocation. All components are precision-made, and every booth is tested, assembled and checked prior to shipping.

IS IT POSSIBLE TO HAVE A DATA CABLE OR A HDMI CABLE CONNECTED TO THE BOOTHS?

IS IT POSSIBLE TO HAVE A DATA CABLE OR A HDMI CABLE CONNECTED TO THE BOOTHS?

Yes. You can add a built-in ethernet port or HDMI connection to any Studiobricks booth.

IS IT POSSIBLE TO HAVE STUDIOBRICKS BOOTHS WITH A LEFT-HANDED DOOR?

IS IT POSSIBLE TO HAVE STUDIOBRICKS BOOTHS WITH A LEFT-HANDED DOOR?

Thanks to our patented modular design, all booths are available in both left and right-handed doors.

IS IT POSSIBLE TO SET UP THE BOOTHS WITHOUT DIFFICULTY?

IS IT POSSIBLE TO SET UP THE BOOTHS WITHOUT DIFFICULTY?

Yes. Our double-walled booths can be set up in any office, industrial environment or exhibition hall with ease. For larger, customized booths, we recommend & offer professional support.

IS IT POSSIBLE TO USE THE EXISTING WIRELESS SIGNALS? (WIFI ETC)

IS IT POSSIBLE TO USE THE EXISTING WIRELESS SIGNALS? (WIFI ETC)

Wifi and cellular signals pass properly through all booths so that any device can be used normally.

IS THERE A WAY TO ADJUST VENTILATION AND LIGHTING?

IS THERE A WAY TO ADJUST VENTILATION AND LIGHTING?

Small booths (Focus Plus and smaller)

Ventilation:
The ventilation system in HOLA, HALLO, Focus and FOCUS Plus booths come with a LCD control display to regulate the intensity levels or to programme the ventilation. This is not an air conditioning system, it is a fan.

Lighting
The lights go on through the motion sensor in the small booths.

Bigger booths (Two Seater and bigger)

Ventilation:
All bigger booths come with one or several sound isolation ventilation mufflers on the roof. You can also connect your booth to the HVAC through the muffler. The ventilation system is connected to the motion sensor.Ventilation guide upon request.

Lighting
The lighting of bigger booths is connected to the motion sensor and can also be controlled through a regulator in the electric column.

WHAT ABOUT FIRE SAFETY?

WHAT ABOUT FIRE SAFETY?

All Studiobricks Office Solutions are manufactured with fire retardant materials that exceed domestic, work place, public building and international protection requirements and keep users safe. The booths´ structure, surface materials, upholstery and acoustic absorbers are 100% flame retardant and tested to comply with local and international standards.

  • The brick : B-s2 d0.
  • Interior acoustic absorbers, and lacquer: B-s1,d0 according to performance requirements of DIN EN 13501-1.
  • Fabric for seating options meets requirements of EN 1021-1:2015 regulations.
  • Foam no. 1 for seating is classified as M1 according to performance requirements of UNE 23723-27 (ES, BE, FR, LU).
  • Foam no. 2 and fibre for seating options meet performance requirements of BS 5852 Regulation (GB, AE) regulations,
  • Floor carpet is Cfl-s1, EN 13501-1.

Further information on the construction and interior materials upon request.

WHAT ARE THE ELECTRICAL SYSTEMS LIKE?

WHAT ARE THE ELECTRICAL SYSTEMS LIKE?

Studiobricks have an input plug on the outside of the booth that can be plugged into a wall socket. Each booth has its own power supply, providing 230 V AC to the lights & fan. Lights are operated by a motion detector. Inside the booths, there are country-specific power outlets and a double USB charger (the latter only on phone booths).

WHAT ARE THE INPUT AND OUTPUT VALUES OF THE BOOTHS?

WHAT ARE THE INPUT AND OUTPUT VALUES OF THE BOOTHS?

Input: 100–240 VAC, 16 A, 50–60 Hz
Output VAC (2 sockets): 100–240 VAC, 16 A, 50–60 Hz
Output double USB Charger: 5 V, 2.1 A

What are the materials and quality like?

What are the materials and quality like?

Only high-grade materials are used for the production of Studiobricks.

We source from the top suppliers and specialists in Europe, so that every input is subject to the highest standards.

All materials comply with EU standards and have been certified through independent testing. Additionally, wood-based materials fulfill requirements of the US Environmental Protection Agency (EPA) under the Toxic Substances Control Act, Title VI, and California Air Resources Board, Phase 2.

Prior to shipment, every booth is test-assembled and inspected by Studiobricks.

WHAT ARE THE PRODUCTS’ DIMENSIONS AND WEIGHTS?

WHAT ARE THE PRODUCTS’ DIMENSIONS AND WEIGHTS?

HOLA

  • Exterior: 1.06 x 1.06 x 2.26 m (3.5 x 3.5 x 7.4 ft)
  • Interior: 0.88 x 0.9 x 2.1 m (3 x 3 x 6.9 ft)
  • Minimum ceiling height required: 2.42 m (8 ft)
  • Approximate Weight: 428 kg (944 Lb)
  • Wall thickness: 8 cm ( 3 inch)
  • Isolation: approximately 45 dB
  • Occupancy: one person

HALLO Acoustic Plus

  • Exterior: 1.17 x 1.17 x 2.22 m ( 3.8 x 3.8 x 7.3 ft)
  • Interior: 0.99 x 1.08 x 2.01 m (3.2 x 3.5 x 6.6 ft)
  • Minimum ceiling height required: 2.35 m (8 ft)
  • Approximate Weight: 459 kg (1012 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: approximately 45 dB
  • Occupancy: one person

FOCUS

  • Exterior: 1.38 x 1.06 x 2.24 m (4.5 x 3.5 x 7.3 ft)
  • Interior: 0.86 x 1.18 x 2.1 m (2.8 x 3.9 x 6.9 ft)
  • Minimum ceiling height required: 2.40 m (8 ft)
  • Approximate Weight: 505 kg (1113 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: one person

FOCUS Plus work station

  • Exterior: 1.21 x 1.68 x 2.24 m (4 x 5.5 x 7.3 ft)
  • Interior: 1.01 x 1.48 x 2.1 m (3.3 x 4.9 x 6.9 ft)
  • Minimum ceiling height required: 2.35 m (8 ft)
  • Approximate Weight: 631 kg (1391 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: up to 2 people

FOCUS Plus stand up booth with or without high desk

  • Exterior: 1.21 x 1.68 x 2.24 m (4 x 5.5 x 7.3 ft)
  • Interior: 1.01 x 1.48 x 2.1 m (3.3 x 4.9 x 6.9 ft)
  • Minimum ceiling height required: 2.35 m (8 ft)
  • Approximate Weight: 631 kg (1391 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 3 people

FOUR SEATER

  • Exterior: 1.98 x 1.21 x 2.47 m (6.5 x 4 x 8 ft)
  • Interior: 1.70 x 1.05 x 2.1 m (5.6 x 3.4 x 6.9 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 797 kg (1757 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 4 people

Focus Space stand up booth 4-6 people (145×180 int.)

  • Exterior: 1.98 x 1.68 x 2.47 m (6.5 x 5.5 x 8 ft)
  • Interior: 1.80 x 1.45 x 2.1 m (6 x 4.8 x 6.9 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 912 kg (2011 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 6 people

Focus Space Meeting booth 4-6 people (240×240 int.)

  • Exterior: 2.58 x 2.58 x 2.47 m (8.5 x 8.5 x 8 ft)
  • Interior: 2.40 x 2.40 x 2.1 m (7.9 x 7.9 x 6.9 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 1.246 kg (2747 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 6 people

EIGHT SEATER (200×150 int.)

  • Exterior: 2.28 x 1.68 x 2.47 m (7.5 x 5.5 x 8 ft)
  • Interior: 2.00 x 1.50 x 2.1 m (6.6 x 5 x 6.9 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 1.350 kg (2976 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 8 people

Focus Space Meeting booth 6-10 people (270×300 int.)

  • Exterior: 2.88 x 3.18 x 2.47 m (9.4 x 10.4 x 8 ft)
  • Interior: 2.70 x 3.00 x 2.1 m (8.8 x 9.8 x 6.9 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 1.473 kg (3247 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 10 people

Focus Space Meeting booth 10+ people (330×390 int.)

  • Exterior: 3.48 x 4.08 x 2.47 m (11.4 x 13.4 x 8 ft)
  • Interior: 3.30 x 3.90 x 2.1 m (10.8 x 12.8 x 6.9 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 2.123 kg (4680 Lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 10+ people

Focus Space Meeting booth 10+ people (660×450 int.)

  • Exterior: 6.78 x 4.68 x 3.07 m (22.2 x 15.4 x 10.1 ft)
  • Interior: 6.60 x 4.50 x 2.7 m (21.7 x 14.8 x 8.6 ft)
  • Minimum ceiling height required: 2.5 m (8.2 ft)
  • Approximate Weight: 4.223kg (9.310 lb)
  • Wall thickness: 8 cm (3 inch)
  • Isolation: 45 dB
  • Occupancy: 1 – 10+ people

Other FOCUS SPACES booth options

  • Exterior: Customizable up to 50m2 (164 ft2)
  • Interior: Customizable up to 50m2 (164 ft2)
  • Wall thickness: 8 cm
  • Isolation: 45 dB

WHAT ARE THE TECHNICAL SPECIFICATIONS OF THE LIGHTS?

WHAT ARE THE TECHNICAL SPECIFICATIONS OF THE LIGHTS?

The quantity of LED lights depends on the size of the booth. Please see each product page for further information. All booths have integrated LED lights with:

HOLA and HALLO:

  • 1680 lm
  • Illuminance average 330 mm at the desk top´s surface
  • LED stripe 800 mm
  • Color temperature: 4000 K
  • Power consumption: 14,4 W/m

Focus, Focus Plus

  • LED double strip, 60cm integrated in ceiling above desk surface regulated through the motion sensor
  • 1680lm
  • Color temperature: 4200 K
  • Power consumption: 17 W/m

Booth models Focus Spaces

  • The Quantity of the integrated lights depends on each booth size.
  • Please consult each product page for further information.
  • Regulated through the motion sensor, additionally a regulator at the electro column.
  • 1620lm/light

What can be done if the room is not tall enough?

What can be done if the room is not tall enough?

All Studiobricks booths can be customized to fit your space.
Let us know what height you need and we’ll send you some options.

What do I need in order to construct a Studiobricks booth?

What do I need in order to construct a Studiobricks booth?

  • Crowbar, long screwdriver, or something similar for opening the transport box.
  • Spirit level for aligning with the floor.
  • Mallet for assembling the blocks.

WHAT ELECTRICAL COMPONENTS CAN BE CHANGED?

WHAT ELECTRICAL COMPONENTS CAN BE CHANGED?

All electric components can be replaced if necessary.

WHAT IS SO SPECIAL ABOUT THE STUDIOBRICKS CONCEPT?

WHAT IS SO SPECIAL ABOUT THE STUDIOBRICKS CONCEPT?

Studiobricks are the first patented modular sound isolation booths for professional use in offices, tradeshows and industrial environments. FOCUS SPACES are easily assembled without drilling, screwing or adhesive bonding! Here is a short video showing a booth being assembled in 7.5 minutes, and dismantled in 3 (click here). HOLA and HALLO booths have 4 security screws for assembly but are as easy to install as all our models.

WHAT IS THE AMOUNT OF AIR FLOW INSIDE THE BOOTHS?

WHAT IS THE AMOUNT OF AIR FLOW INSIDE THE BOOTHS?

The small booths for up to 1 person have an average air flow of approx. 33,5m3/h.
The air flow of bigger booths dependens size and ventilator. More information upon request.

WHAT IS THE POWER CONSUMPTION AND WHAT DOES IT REFER TO?

WHAT IS THE POWER CONSUMPTION AND WHAT DOES IT REFER TO?

Power consumption is a constant value determined by the power used by the booth’s internal components (electric unit, motion detector, light, fan). All booths, consume 13 – 42 W maximum while in use, which includes:

  • LED lights: up to 11.5 W
  • Fan: depends on the model, upon request
  • Sensor: up to 0.45 W

WHAT KIND OF POWER OUTLETS ARE THERE?

WHAT KIND OF POWER OUTLETS ARE THERE?

2 power sockets and 1 double USB charger in the booths designed for 1 person. A LAN cable lead-through is also available as an add-on. The bigger booths come with more outlets, please see each product page for more details.

WHAT’S THE FAN LIKE AND HOW MUCH NOISE DOES IT MAKE?

WHAT’S THE FAN LIKE AND HOW MUCH NOISE DOES IT MAKE?

All 1 – 3 person booths are equipped with a soundproof ventilation system that is extremely quiet. The fan is integrated to the booth’s interior wall panel (below the table).

The bigger booths for 4 and up people, come with a sound isolation ventilation system on the roof that provides a strong air flow. In case you want to connect it to the building’s HVAC, it is designed to filter noise. For further details please email info@studiobricks.com.

What’s the lifespan and warranty of Studiobricks’s products?

What’s the lifespan and warranty of Studiobricks’s products?

We offer a 2-year warranty from the billing date for repair and spare parts. Studiobricks accessories (including LED lighting, electric parts, hinges, ventilator, and occupancy sensor) are under warranty for 1 year.

This warranty does not cover damage from an accident, mishandling, vandalism, misuse, abuse, alteration or lack of reasonable care & maintenance. This warranty also doesn’t cover damage resulting from outdoor use, as Studiobricks booths are designed for indoor use only. This warranty is only extended to the original owner, and is non-transferable.

Where can I try a Studiobricks booth?

Where can I try a Studiobricks booth?

Click here to locate and visit one of our Showrooms! View contact page for more details.

Which booth is recommended for a drum kit?

Which booth is recommended for a drum kit?

Drum kits generally fit in booths with internal dimensions of 6.89 x 6.89 inch (2.10 x 2.10 m).
Studiobricks Pro provides the best sound isolation for drums.

Which variations of the Studiobricks sound isolation booths are available?

Which variations of the Studiobricks sound isolation booths are available?

  1. Studiobricks One, One Plus and One XXL: compact booth with double-wall construction, an interior size of 2.95 x 3.94 ft or 2.95 x 4.92 ft (0.90 x 1.20, 0,90 x 1,50 and 0,90 x 1,80 m), and a soundproofing performance of 45 dB in accordance with ISO 717-1.
  2. Studiobricks Double-Walled: state-of-the-art soundproofing requirements, interior sizes from 3.94 x 3.94 ft (1.20 x 1.20 m) to up to 164 ft2 (50m2), and a soundproofing performance of 45 dB in accordance with ISO 717-1.
  3. Studiobricks Pro Triple-Walled: booth for professional uses, interior sizes from 3.94 x 3.94 ft (1.20 x 1.20 m) to up to 164 ft2 (50m2), and a soundproofing performance of 48 dB in accordance with ISO 717-1.

WHO ASSEMBLES THE BOOTHS?

WHO ASSEMBLES THE BOOTHS?

For commercial booths, we recommend one of our trained professionals. However, our units were designed so that anyone can assemble them. Every customer receives precise installation instructions in a pdf file and/or video. Booths are delivered to your curb in a box by a truck with a loading ramp. We recommend a minimum of 2 people to carry the delivery to your space and complete assembly.

Assembly Videos

STUDIOBRICKS ONE & ONE PLUS ASSEMBLING IN REAL TIME

STUDIOBRICKS ONE & ONE PLUS ASSEMBLING TIMELAPSE

FAQ